--------------------------------------------------- Product Name: Shenzhou Spacecraft Copyright 2017 Michael Crisafulli Contact Michael_C via Renderosity Site Mail -------------------------------------- Product Description First launched in 1999, the Chinese Shenzhou spacecraft made its first manned flight in 2003. The spacecraft is designed to carry a crew of three, but has also flown with one or two crew members. The Shenzhou Spacecraft 3D model is a fully-rigged Poser figure, sized for Poser people, with detailed cabin interiors. The three spacecraft modules are separate parts and can be moved or hidden individually: - Propulsion module - Reentry module - With separate heatshield - Orbital module FIGURE The Shenzhou Spacecraft figure has full ERC control at the Body level: o Unfold solar panels o Rotate solar panels o Open EVA hatch o Open reentry module hatch o Rotate outside instrument cluster o Disconnect umbilical cables POSES . MAT - Full standard texture set - Post-reentry texture for reentry module - MAT files to turn off cabin light glow (lights must be turned off separately) . Configuration - Non-EVA (default) - EVA . Hide/Show - Hide propulsion module - Hide orbital module (there are separate show poses for EVA and non-EVA) - Hide heatshield . Expose Interior - Open and close the end of the orbital module to view the interior - Remove and replace of the parachute compartments to view the reentry module interior . Parachute - Special poses for use with Cybertenko's Round Parachute, not included (see below) . Taikonaut crew poses - 2 M4 and V4 orbital module zero-gee poses - 3 M4 and V4 reentry module poses (one each seat) - 4 bonus poses for use with a bulky spacesuit-clad M4 CAMERAS . Full camera set for easy viewing and rendering - Includes main, auxiliary, left, right, top, bottom, front, and back cameras . 5 Additional Main camera exterior positions 3 On-parachute views 2 special look-in views to use in concert with the Expose Interior poses . 10 Dolly camera reentry and orbital module cabin interior positions PROPS . Preloaded - Cabin lights - Small companion satellite TEXTURES: 51 texture maps up to 4000x4000 pixels All components are UV-mapped All texture templates included GEOMETRY The figure and props use external geometry in the Poser geometries folder -------------------------------------- System Requirements: Poser 6 and above, including Poser 11 Tested in DAZ Studio 4.9 -------------------------------------- Ownership Statement: All of the content in this package was created by Michael Crisafulli (Michael_C) and may include derivatives of the following vendor/merchant resources: One or more textures on this 3D model have been created with images from Textures.com. These images may not be redistributed by default. Please visit www.textures.com for more information. One or more of the textures were created using textures from Mayang's Free Textures. Visit mayang.com/textures/ for more information. One or more of the textures were created using textures from MaxTextures.com Free Textures. Visit MaxTextures.com for more information. One or more textures used public domain resources from Wikimedia Commons (commons.wikimedia.org) -------------------------------------- Notes on the Model The Shenzhou Spacecraft model was created referring to photos and drawings on the Internet. The spacecraft, particularly the orbital module, has a different configuration for each mission. The model uses features from several mission and includes a special configuration associated with Extra-Vehicular Activity (EVA). -------------------------------------- Installation Instructions: Unzip files to your main Poser directory, being sure to check "Use Folder Names" and the files will unpack to their proper location. Refer to the file list below for file locations. In general, Shenzhou Spacecraft Poser files will be found in the "Michael_C/Shenzhou" folder within each of the Poser sub-libraries (Figure, Pose, etc.) Note that although most of the Poser files may be moved to other locations, the geometries and textures MUST be left in the listed locations. -------------------------------------- Usage Tips: The Shenzhou Spacecraft figure uses ERC controls at the Body level. To access the controls the Shenzhou Spacecraft figure Body is selected by default. PARAMETER DIALS - The parameter dial groups load collapsed for convenience. Open a group or subgroup to use it. Transform These standard dials control the overall scale and position of the spacecraft. Set X, Y, Z position and rotation with standard controls The Resize scale control is provided for resizing the figure in scenes where matching standard Poser figure size is not needed. Control - Unfold the PM and OM solar arrays separately - Rotate the solar arrays in concert to follow the sun - Rotate the instrument cluster on the lower part of the propulsion module - Release the umbilical cables from the reentry module Hatches - Operate the EVA hatch latch mechanism (small movement) - Open the EVA hatch in the orbital module - Open the reentry module hatch POSES - Configuration Set up the orbital module for EVA operations or restore the default. - Expose Interior Sets the Shenzhou spacecraft to see into either of the cabins from outside. (Use the associated Main View camera.) - Parachute Poses to use Cybertenko's Round Canopy Parachute (separately available in the Renderosity marketplace). See instructions below. - Taikonaut Poses for M4 and V4 in the Shenzhou cabins. These poses are more or less optimized for lightweight jumpsuits. A bonus set is incldued for M$ in a bulky spacesuit. - MATs A MAT pose is included to restore the Shenzhou Spacecraft to its default materials. Another MAT pose colors the reentry module to reflect a fiery descent. - Hide/Show The spacecraft consists of three modules that may be positioned independently The Hide/Show poses facilitate rendering different mission phases. CAMERAS A set of standard cameras is included to provide exterior views of the Shenzhou Spacecraft; the default Poser cameras show only a small part of the spacecraft. The Main Views folder contains alternate exterior views using the Main camera. The Interior CAMs folder contains a number of Dolly CAM settings for various interior views. Note that different versions of Poser may handle camera settings differently so some adjustment may be needed for proper rendering. The On-Parachute folder contains Main camera settings for use with Cybertenko's Round parachute, available in the Renderosity Marketplace. LIGHTS This product includes a set of orbital lights and two sets of cabin interior lights. - Orbital lights Defaults with a high sun light angle and a low earth light angle as if the sun is high in the scene sky and the earth below. Move these lights around to match your own scene. - Cabin lights Note that you should ADD the cabin lights to your scene or they will replace all current lights. One set is set up for Firefly renders and the other for Superfly. The cabin lights need to be separately parented to the associated module if you wish to move the spacecraft. ------------------------------ -- Using Cybertenko's Parachute ------------------------------ After reentering the atmosphere and slowing, the Shenzhou reentry module descends on one of two parachutes. The Shenzhou Poser set includes a MAT-MOR pose to fit Cybertenko's Round Canopy Parachute separately available product to the spacecraft and apply a new canopy material. 1 Select the Shenzhou Body 2 Optionally apply the Reentered MAT pose (Shenzhou/MATs pose folder) if you desire a more realistic burned texture for the reentry module 3 Apply RM On-Parachute pose (Shenzhou/Parachute pose folder) 4 Load and select the Deployed Parachute figure from Figures/Cybertenko/Parachute 5 Apply the Parachute MAT-MOR pose (Shenzhou/Parachute pose folder) 6 If you wish to reposition the reentry module/parachute assembly, parent the Deployed Parachute Body to the Shenzhou ReentryMod. Select the Shenzhou Body or the ReentryMod to translate or rotate Note: The Parachute MAT-MOR pose files contains texture paths that may be incompatible with MAC systems. These are paths associated with Cybertenko's Round Parachute product and are beyond my control. ------------------------------ -- DAZ Studio Compatibility - ------------------------------ The Shenzhou Spacecraft figure loads, operates, and renders in DAZ Studio. DAZ Studio uses different camera designations from Poser so the included camera presets don't all work. Those that work may require some adjustment. The Shenzhou Spacecraft figure includes some pre-loaded smart props. Unlike in Poser, the MAT, Configuration and Hide-Show poses don’t automatically apply to these parented props. The props need to be selected one by one and the pose applied individually. --------------------------------------------------- List of files contained within this product's zip files. :Documentation:Michael_C Shenzhou_Spacecraft_ReadMe.txt Marketplace_Standard_License.txt :Runtime:Geometries:MCC:Shenzhou CompanionSatUV1.obj LampUVfin.obj ShenzhouFinalP4.obj :Runtime:libraries:Camera:Michael_C:Shenzhou Shenzhou Set.cm2 Shenzhou Set.png :Runtime:libraries:Camera:Michael_C:Shenzhou:Interior CAMs OM Interior 1.cm2 OM Interior 1.png OM Interior 2.cm2 OM Interior 2.png OM Interior 3.cm2 OM Interior 3.png RM Interior 1.cm2 RM Interior 1.png RM Interior 2.cm2 RM Interior 2.png RM Interior 3.cm2 RM Interior 3.png RM Interior 4.cm2 RM Interior 4.png RM Interior 5.cm2 RM Interior 5.png RM Interior 6.cm2 RM Interior 6.png RM from OM.cm2 RM from OM.png :Runtime:libraries:Camera:Michael_C:Shenzhou:Main Views View OM Interior.cm2 View OM Interior.png View RM Interior.cm2 View RM Interior.png :Runtime:libraries:Camera:Michael_C:Shenzhou:On-Parachute On Parachute 1.cm2 On Parachute 1.png On Parachute 2.cm2 On Parachute 2.png On Parachute 3.cm2 On Parachute 3.png :Runtime:libraries:Character:Michael_C:Shenzhou Shenzhou.cr2 Shenzhou.png :Runtime:libraries:Light:Michael_C:Shenzhou !Orbit Set.lt2 !Orbit Set.png Cabin Lights (Firefly).lt2 Cabin Lights (Firefly).png Cabin Lights (Superfly).lt2 Cabin Lights (Superfly).png NOTE- ADD Cabin Lights.lt2 NOTE- ADD Cabin Lights.png :Runtime:libraries:Pose:Michael_C:Shenzhou:Configuration EVA.png EVA.pz2 Non-EVA.png Non-EVA.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Expose Interior OM Interior See.png OM Interior See.pz2 Orbital Interior Close.png Orbital Interior Close.pz2 RM Interior Close.png RM Interior Close.pz2 RM Interior See.png RM Interior See.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Hide-Show Heatshield Hide.png Heatshield Hide.pz2 Heatshield Show.png Heatshield Show.pz2 Orbital Hide.png Orbital Hide.pz2 Orbital Show - EVA.png Orbital Show - EVA.pz2 Orbital Show - NonEVA.png Orbital Show - NonEVA.pz2 Propulsion Hide.png Propulsion Hide.pz2 Propulsion Show.png Propulsion Show.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:MATs Lamps-OFF MAT.png Lamps-OFF MAT.pz2 Lamps-ON MAT.png Lamps-ON MAT.pz2 OM Lamp-OFF MAT.png OM Lamp-OFF MAT.pz2 RM Lamp-OFF MAT.png RM Lamp-OFF MAT.pz2 Reentered MAT.png Reentered MAT.pz2 Shenzhou MAT.png Shenzhou MAT.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Parachute Parachute MAT-MOR.png Parachute MAT-MOR.pz2 RM On-parachute.png RM On-parachute.pz2 See ReadMe for Parachute Instructions.png See ReadMe for Parachute Instructions.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Taikonaut:Bonus Spacesuit Poses Center Seat.png Center Seat.pz2 EVA Hatch.png EVA Hatch.pz2 Left Seat.png Left Seat.pz2 Right Seat.png Right Seat.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Taikonaut:Orbital Module M4 OM 1.png M4 OM 1.pz2 M4 OM 2.png M4 OM 2.pz2 V4 OM 1.png V4 OM 1.pz2 V4 OM 2.png V4 OM 2.pz2 :Runtime:libraries:Pose:Michael_C:Shenzhou:Taikonaut:Reentry Module M4 Center.png M4 Center.pz2 M4 Left.png M4 Left.pz2 M4 Right.png M4 Right.pz2 V4 Center.png V4 Center.pz2 V4 Left.png V4 Left.pz2 V4 Right.png V4 Right.pz2 :Runtime:libraries:Props:Michael_C:Shenzhou:Extra Lamp.png Lamp.pp2 :Runtime:libraries:Props:Michael_C:Shenzhou:Preloaded Companion Satellite.png Companion Satellite.pp2 Interior Lamps.png Interior Lamps.pp2 :Runtime:textures:MCC:Shenzhou SZ-Canopy.jpg SZ-CanopyAlpha.jpg SZ-ChuteC-HS.jpg SZ-ChuteC-HSbump.jpg SZ-ChuteC-HSpost.jpg SZ-ChuteComp.jpg SZ-ChuteCompBump.jpg SZ-EVAHatch.jpg SZ-EVAHatchBump.jpg SZ-EVARails.jpg SZ-EVARailsBump.jpg SZ-Glass.jpg SZ-GlassAlpha.jpg SZ-GlassGlow.jpg SZ-InstPaneBump.jpg SZ-InstPanel.jpg SZ-InstPanelGlow.jpg SZ-InstScreens.jpg SZ-Instruments.jpg SZ-InstrumentsBump.jpg SZ-InstrumentsGlow.jpg SZ-Lamp.jpg SZ-OMInterior.jpg SZ-OMInteriorBump.jpg SZ-OMInteriorGlow.jpg SZ-OMshell.jpg SZ-OMshellBump.jpg SZ-OMshellParts.jpg SZ-OMshellPartsBump.jpg SZ-PMdetails.jpg SZ-PMdetailsBump.jpg SZ-PMjets.jpg SZ-PMjetsBump.jpg SZ-PropulsionMod.jpg SZ-PropulsionModBump.jpg SZ-RE-I.jpg SZ-RE-IBump.jpg SZ-RE-O.jpg SZ-RE-OBump.jpg SZ-RE-Opost.jpg SZ-REparts.jpg SZ-REpartsBump.jpg SZ-REpartsGlow.jpg SZ-RMHatch.jpg SZ-RMHatchBump.jpg SZ-Seat.jpg SZ-SolarPanel.jpg SZ-SolarPanelBump.jpg SZ-TankAssy.jpg SZ-Umbilical.jpg SZ-UmbilicalBump.jpg Templates\Michael_C\Shenzhou Spacecraft ChuteComp.bmp ChuteCov-Heat.bmp Companion.bmp EVAhatch.bmp EVARails.bmp Glass.bmp InstPanel.bmp Instruments.bmp InstScreens.bmp Lamp.bmp OMInterior.bmp Omshell.bmp OMshellParts.bmp PMdetails.bmp PMjets.bmp PropulsionMod.bmp RE-I.bmp RE-O.bmp REparts.bmp RMhatch.bmp Seat.bmp SolarPanel.bmp TankAssy.bmp Umbilical.bmp