Skylon Racers - for Poser 4 and Higher (c) Sparkyworld

--------------------
DESCRIPTION OF MODEL
--------------------
The 3 models in this product are a set of 3 machines based on the typical types of flying machine used for personal transportation, and racing, in Skylon city. 

Skylon racing is a highly illegal sport, so the pack includes 2 illegal racers and a police flyer.
Each model comes with high=medium resolution textures and an M3 pose for each machine, which will work with other Mil figures with a little tweaking.    

The three racers featured are: 

Skylon 1: A home built flyer made from recycled parts, and comes with anti-gravity lifters (usually stolen from taxis) and eco-nuke engine. These flyers are considered the most dangerous types of racers and even possession of such a machine will result in a hefty fine and a smacked botty. 

Skylon 2: This version represents the most common form of police bike, the Cop-A-Tron 5000 from MegaCorp. 
With a top speed of 350 MPH, this machine comes with engine jamming equipment, twin blastermatic [TM] lasers and a really loud siren.     

Skylon 3: An ex-military machine, the Penetrator Mk 7, made by Molek industries. This is the favoured machine for racing as it is affordable and can outrun most forms of law enforcement. However this power comes at a price, this racer is notorious for it's lack of safety features such as seat belts.  

And remember don't try this at home!

----------------------------
COPYRIGHT/OWNERSHIP STATEMENT
-----------------------------
All of this product's content was originally created by Mr Sparky.

-------------------
SYSTEM REQUIREMENTS 
-------------------
Poser 4 or Higher. 
No other files are required.

--------------------
INSTALLING THE FILES 
--------------------
Unzip this zip file into your Poser directory using paths.
It will create various directories and files, if you are really bored a list of these can be found at the end of this readme. 

---------------------
HOW TO USE THIS MODEL
---------------------
Using the models:

1) Start Poser.
2) Open the Props library. 
3) Chose from: 

Skylon 1 - the brown one.
Skylon 2 - the cop one.
Skylon 3 - the green one.

To use the starter poses:

1) Load M3 
2) Open the Pose library. 
3) Chose from: 

Skylon 1 
Skylon 2 
Skylon 3

Note on Poses:  

On some poses you need to slightly adjust the M3 figure to give the best pose. 
Especially if you have clothed the figure. This is NOT a fault of the product, but because poser loads the racers (which have offset driving seats) into the centered position, and M3 also loads into the centred position.   

To help you, please refer to Pose_Settings.jpg for some settings.  

User tips:

The poses will also work with other Mil figures if you tweak them a bit. 

Some of the textures in this product are high=res. If you find that poser has trouble rendering them, load the files  into your graphics editing software, resample the images and save them to the relevant folder using the same names. 

If you wish to make your own texture maps, templates have been provided.  
To use the templates, resize them in you graphics application, create your own own maps and add them to the model using Poser material editor.  
 
No MY MAP's poses have been provided this time as these models load as props.     

-------------
NEED SUPPORT ?
--------------
For product support contact mrsparky through R'oistys Instant Messaging service.