Chevrolet 1937 4 Door

COPYRIGHT 2012 BY Eric Audibert and Alain Bouchet ( Nationale7 )

Chevrolet's styling for 1937 was the work of Jules Agramonte, who had made his reputation as designer of the strikingly beautiful 1934 LaSalle. He was assisted by Lewis Simon, who did much of the detail work. It was a crisp design, one that has clearly stood the test of time better than those of its principal rivals. A distinguishing feature of the 1937 Chevy was a crease in the body, starting in the valley between the front fender and engine compartment, then flowing at a sinking angle back across the cowl and onto the front door. In profile, the effect of this crease presaged the extended fenders that would appear on the 1942 models. It was a simple touch, but an effective one. Harley Earl, General Motors's styling chief, called it the "diamond crown speedline." 
Bodies were considerably more spacious than before. This was accomplished in a number of ways. First, thanks to the new frame, it was possible to move the engine forward by a little more than three inches. Front and rear seats were shifted ahead by 2.5 inches and 4.25 inches, respectively. Body width was greater by four inches, floors were two inches lower, and rear doors were four inches longer on sedans. Yet despite the additional roominess, the 1937 model was a lighter car than its predecessor. 

 


System requirements : PC/MAC and compatible software versions


POSER 6 or higher
WARNING : NOT TESTED IN DAZ STUDIO!

INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS LOCATED IN THE POSER FOLDER:
Check that you have the total control on your Poser program.

Unzip the runtime.zip into your Poser folder.
The Chevrolet_1937_4D is now located in Poser\Runtime\Libraries\Character\Nationale7\
The textures are located in Poser\runtime\textures\NATIONALE7TEXTURES\CHEVY37_4D_Textures\


INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS NOT LOCATED IN THE POSER FOLDER:

If you have bought a Nationale7 product for the first time:
         Open the Chevrolet_1937_4D.zip
         Open the runtime folder. 
           - Open the Textures folder. Drag the Nationale7Textures folder into the Textures folder located in your hard drive.
           - Open the Libraries folder. Open the Character folder. Drag the Nationale7 folder into the Character folder located in your hard drive.
If you have yet bought a Nationale7 product, the Nationale7Textures folder and the Nationale7 character folder are yet created.
         Open the Chevrolet_1937_4D.zip
         Open the runtime folder. 
            - Open the Textures folder. Open the Nationale7Textures folder. Drag the CHEVY37_4D_Textures folder into the Nationale7Textures folder located in your hard drive.
           - Open the Libraries folder. Open the Character folder. Open the Nationale7 folder. Drag the 2 Chevrolet_1937_4D files ( cr2 and png ) into your Nationale7 folder located in your hard drive.


You must maintain all copyright notices on all copies of the SOFTWARE PRODUCT.

This model is a property of Eric Audibert and Alain Bouchet ( Nationale7 ).

DO NOT REMOVE TEXT FROM THIS MODEL !!!
DO NOT sell, resell, and distribute this model in any form / media without our permission !
DO NOT Provide any free download of this model in any web site or electronic devices without our permission !
DO NOT modify and use any part of this model without our permission !

Useage tips and instructions:


To move the whole car, select CAR

ERC Dial :

FRONTDOORLEFT : ERC Dial- CLOSE/OPEN : O°/-60°
FRONTDOORRIGHT : ERC Dial : CLOSE/OPEN : O°/60°
REARDOORLEFT : ERC Dial- CLOSE/OPEN : O°/70°
REARTDOORRIGHT : ERC Dial : CLOSE/OPEN : O°/-70°
FRONTWHEELLEFT : ERC Dial : STEERING_LEFT/RIGHT:20°-20° and/or ROTATION
FRONTWHEELRIGHT : ERC Dial: STEERING_LEFT/RIGHT:20°-20° and/or ROTATION
REARWHEELS: ERC Dial- ROTATION


CHANGING THE COLOURS:


MAINBODY : 
  1 )select MAIN BODY, go to the Material room, select materials/inside_body, give the painting of your choice.
  2 )then do the same with the following parts: dashboard2, dashboard, gutter, step, main_body
DOORS :
  1 ) select FRONTDOORLEFT/chev37_4d_fdl_1 , go to the material room, select materials/fr_door_left1, give the painting of your choice.
  2 ) select FRONTDOORRIGHT/chev37_4d_fdr_1 , go to the material room, select materials/fr_door_right1, give the painting of your choice.
  3 ) select REARDOORLEFT/chev37_4d_rdl_1 , go to the material room, select materials/rr_door_left1, give the painting of your choice.
  4 ) select REARDOORRIGHT/chev37_4d_rdr_1 , go to the material room, select materials/rr_door_right1, give the painting of your choice.
RIMS :
  1 ) select REARWHEELS, go to the Material room, select materials/rim, give the painting of your choice.
  2 ) select FRONTWHEELLEFT, go to the Material room, select materials/rim, give the painting of your choice.
  3 ) select FRONTWHEELRIGHT, go to the Material room, select materials/rim, give the painting of your choice.
SEATS :
  1 ) select MAIN BODY, go to the Material room, select materials/rear_seat, give the painting of your choice.
  2 ) select MAIN BODY, go to the Material room, select materials/front_seat, give the painting of your choice.
  
A template is given to allow the changing of the license plate.

Files list : 

runtime:Textures:Nationale7TEXTURES:CHEVY37_4D_Textures
        chev37_4d_capofwheel_bump.jpg
        chev37_4d_clock.JPG
        chev37_4d_dashpanel.jpg
        chev37_4d_front_light.jpg
        chev37_4d_front_registration.jpg
        chev37_4d_frontlogo.jpg
        chev37_4d_rear_indicatore.jpg
        chev37_4d_rear_registration.jpg
        chev37_4d_tyre.jpg
        chev37_4d_tyre_bump.jpg
        DSCF0004.jpg
        

runtime:libraries:Character:Nationale7
	 Chevrolet_1937_4D.png
	 Chevrolet_1937_4D.cr2

Documentation
	Chevrolet 1937 4 Door Licence.txt
        Chevrolet 1937 4 Door ReadMe.txt

Templates:
        chev37_4d_registrationtemplate.jpg