CADILLAC_FLEETWOOD_1953 Thank you for purchasing this item - We hope you are happy with it! ****************************************************************** If you have any problems with it, please contact us and we shall give you an answer as quickly as possible. COPYRIGHT 2013 BY Eric Audibert and Alain Bouchet ( Nationale7 ) You must maintain all copyright notices on all copies of the SOFTWARE PRODUCT. This model is a property of Eric Audibert and Alain Bouchet ( Nationale7 ). DO NOT REMOVE TEXT FROM THIS MODEL !!! DO NOT sell, resell, and distribute this model in any form / media without our permission ! DO NOT Provide any free download of this model in any web site or electronic devices without our permission ! DO NOT modify and use any part of this model without our permission ! The 1953 Cadillac Fleetwood Seventy-Five Sedan was the last year for the Fourth generation sedan and it was distinguished by it's large front grill with integrated 'dagmar bumperettes.' Furthermore a broad chrome strip running around the bottom of the body distinguished this model year. The model was easily identified by its Fleetwood badges and eight louvers on the rear fender. Under the skin, the body got a new 12 volt electrical system and a slight increase in power to 210 bhp. For $619.55 a Frigidaire air conditioning unit could be installed in the trunk. Other options included the Autronic Eye which automaticallt dimmed the front high beams and chrome wire wheels. Almost 20,000 of these Sedans were made with a factory price of $4,305. Data for Cadillac Fleetwood Seventy-Five Sedan, model year 1953, version for North America with 4-door limousine body type, RWD (rear-wheel drive) and manual 3-speed gearbox: petrol (gasoline) engine of 5425 cm3 / 331.1 cui displacement with advertised power 156.5 kW / 210 hp / 213 PS ( SAE ) / 4150 and 447 Nm / 330 lb-ft / 2700 of torque. Dimensions: this model outside length is 6007 mm / 236.5 in, it’s 2032 mm / 80 in wide and has wheelbase of 3727 mm / 146.75 in. The value of a drag coefficient, estimated by a-c, is Cd = 0.65 . Standard wheels were fitted with the tires size: (check standard and alternative tire sizes). Reference vehicle weights are: shipping weight 2178 kg / 4801 lbs estimated curb weight 2290 kg / 5050 lbs . System requirements : PC/MAC and compatible software versions. POSER 7 or higher WARNING: NOT TESTED IN DAZ STUDIO! INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS LOCATED IN THE POSER FOLDER: Check that you have the total control on your Poser program. Open the CADILLAC_FLEETWOOD_1953.zip Unzip the runtime.zip into your Poser folder. The CADILLAC_FLEETWOOD_1953 is now located in Poser\runtime\libraries\Character\Nationale7\. The textures are located in Poser\runtime\textures\NATIONALE7TEXTURES\Cadillac53_fleetwodd_textures\. INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS NOT LOCATED IN THE POSER FOLDER: If you have bought a Nationale7 product for the first time: Open the CADILLAC_FLEETWOOD_1953.zip Open the Runtime folder. - Open the Textures folder. Drag the Nationale7Textures folder into the Textures folder located in your hard drive. - Open the Libraries folder. Open the Character folder. Drag the Nationale7 folder into the Character folder located in your hard drive. If you have yet bought a Nationale7 character, the Nationale7Textures folder and the Nationale7 character folder are yet created. Open the CADILLAC_FLEETWOOD_1953.zip Open the runtime folder. - Open the Textures folder. Open the Nationale7Textures folder. Drag the Cadillac53_fleetwodd_textures folder into the Nationale7Textures folder located in your hard drive. - Open the Libraries folder. Open the Character folder. Open the Nationale7 folder. Drag the 2 CADILLAC_FLEETWOOD_1953 ( cr2, and png ) into your Nationale7 folder located in your hard drive ( Libraries/Character ). USEAGE TIPS AND INSTRUCTIONS To MOVE the whole car, select CAR ROTATING PARTS with single ERC Dials: Select CAR/Parameters. 6 VIRTUAL TOOTHED WHEELS ARE CREATED : ALLWHEELSROTATION STEERING ( the STEERING TOOTHED WHEEL controls both FRONT WHEELS and the STEERING WHEEL ). FRONT_DOOR_LEFT:CLOSE/OPEN FRONT_DOOR_RIGHT:CLOSE/OPEN REAR_DOOR_LEFT:CLOSE/OPEN REAR_DOOR_RIGHT:CLOSE/OPEN WARNING : DON'T FORGET TO SELECT Figure/Use Limits! CHANGING THE PAINTING OF THE CAR: Select CAR/MAINBODY go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/MAINBODY go to the material room. Select Material/roof. Apply the material of your choice. Select CAR/FRONT_DOOR_LEFT/cadfw53_frdoorleft_1, go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/FRONT_DOOR_RIGHT/cadfw53_frdoorright_1, go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/REAR_DOOR_LEFT/cadfw53_rrdoorleft_1, go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/REAR_DOOR_RIGHT/cadfw53_rrdoorright_1, go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/FRONT_DOOR_LEFT/cadfw53_frdoorleft_1/thicknessl, go to the material room. Select Material/paint. Apply the material of your choice. Select CAR/FRONT_DOOR_RIGHT/cadfw53_frdoorright_1/thicknessr, go to the material room. Select Material/paint. Apply the material of your choice. CHANGING THE COLOUR OR THE TEXTURE OF THE LEATHER PARTS: Select CAR/MAINBODY go to the material room. Select Material/seat_fabric_1. Apply the material of your choice. Select CAR/MAINBODY go to the material room. Select Material/seat_fabric_2. Apply the material of your choice. Select CAR/MAINBODY go to the material room. Select Material/inside_fabric. Apply the material of your choice. A choice of 2 pictures is available inside the Cadillac53_fleetwodd_textures folder with original Cadillac colours. A template is given if you want to create your own inside fabric colours and textures. Select CAR/FRONT_DOOR_LEFT/cadfw53_frdoorleft_1, go to the material room. Select Material/inside_fabric2. Apply the material of your choice. Select CAR/FRONT_DOOR_RIGHT/cadfw53_frdoorright_1, go to the material room. Select Material/inside_fabric2. Apply the material of your choice. Select CAR/REAR_DOOR_LEFT/cadfw53_rrdoorleft_1, go to the material room. Select Material/inside_fabric2. Apply the material of your choice. Select CAR/REAR_DOOR_RIGHT/cadfw53_rrdoorright_1, go to the material room. Select Material/inside_fabric2. Apply the material of your choice. CHANGING THE COLOUR OF THE CARPETING: Select CAR/MAINBODY go to the material room. Select Material/floor. Apply the material of your choice. A REGISTRATION TEMPLATE IS GIVEN. Files list : runtime:Textures:Nationale7TEXTURES:DS-21_Textures cadfw53_dashaccessory.jpg cadfw53_frontlignt cadfw53_inside_fabric_blue.jpg cadfw53_inside_fabric_green cadfw53_instruments1.jpg cadfw53_instruments2.jpg cadfw53_logo.jpg cadfw53_rear_light.jpg cadfw53_registration.jpg cadfw53_steeringlogo.jpg cadfw53_tyre.jpg cadfw53_tyre_bump.jpg cadfw53_wheellogo.jpg DSCF0004.jpg runtime:libraries:Character:Nationale7 CADILLAC_FLEETWOOD_1953.png CADILLAC_FLEETWOOD_1953.cr2 Documentation CADILLAC_FLEETWOOD_1953 ReadMe.txt CADILLAC_FLEETWOOD_1953 License.txt Templates: cadfw53_inside_fabric.jpg cadfw53_registration.jpg